RP300-1RPS

1 Vessel Carbon/DI Resin "PAK" System Specifications

Water Recycling and Other Useful Information

Click on a link below to return to the RP300-RPS home page, system prices, explanation of DI water and installation instructions.

"PAK" Home Page

System Prices

Explanation of DI water

Installation Instructions

Rinsepure Technologies can manufacture "PAK" systems with from 1 to 5 housings depending on your application, and flow rate required. Standard systems are made from PVC, Polypropylene and Stainless Steel housings are available. Each housing holds 1/2 cu.ft. of either carbon or deionizing resin. There also is a pre and post filter, adjustable DI meter and flow control valve to give you a turnkey system ready to run the day it arrives
The exhausted carbon/resin under most circumstances can be regenerated thru one of our vendors to save costs.

Go to: Home Page
Deionizing Systems
Ultrafiltration Systems
Carbon Systems                   
Reverse Osmosis Systems
Precious Metal Recovery Systems
Ceramic Membrane Systems

NOTE: Systems come without any carbon or resin "PAK's".
Click on the below to get "PAK" pricing

Expendable Pricing

Typical RP300-1RPS System Features:

  • 1 - 6" x 31" Carbon/DI housing  with 1/2 cu.ft. capacity
  • 2 - 3" x 10" Pre/Post filter housings with one set of 20 micron spun polypropylene filters
  • 3 - Bleed Valves
  • .5 to 1 GPM flow rate
  • 120 or 220 VAC electrical requirements
  • 1/2 HP recirculating pump
  • Water quality 5-range meter
  • Polypropylene piping and housings
  • In-line flow meter
  • Pressure gauge
  • Flow control valve 

Optional Features:

  • Tank low-level shut-off
  • Tank water quality monitor
  • Remote water quality monitor
  • 2 HP recirculating pump
  • Extra "PAK" housings (RP300-2RPS thru RP300-_RPS)

PAK Availability:

  • High quality mixed bed resin "PAKs"
  • Cation exchange resin "PAKs"
  • Anion exchange resin "PAKs"
  • Granular activated carbon "PAKs"
  • High efficiency polypropylene filter cartridges